Transducers

Multiple outputs

Accuracys from .1% to .5%

Din rail, panel or rack mount units

All transducers conform to one or more of the following: UL, CSA, CE

AC current inputs: 1 to 600 AC amperes direct, 1P or 3P

AC voltage inputs: 1 to 600 AC volts direct, 1-34,500 AC volts with external transformer, 1P or 3P

DC voltage inputs: 1 milliamp to 10 DC amperes direct, 1-25000 DC amperes with External shunt

DC current inputs: 1 millivolt to 600 DC volts direct

Watt, var, kW, power factor, phase angle, VA: 5A/120VAC, 5A/240VAC, 5A/480 VAC, 1P or 3P

Frequency ranges: from 10HZ to 440HZ

Current transducers (average and true RMS) 1P or 3P

Frequency transducers

Multiple outputs and user selectable transducers (Hsiang Cheng)

Panel mount utility grade (.2% accuracy or better)

Phase angle transducers

Power factor transducers

Pressure transducers

Pulse output transducers

VA transducers

VAR transducers

VAR hour transducers

VAR/VAR hour transducers

Voltage transducers (average and true RMS) 1P or 3P

Watt transducers

Watt hour transducers

Watt/Watt-hour transducers

Watt/Var transducers (combination)

Specify panel mount or din rail

Specify .2% accuracy (utility grade) or .5% accuracy (industrial grade)

Specify single or 3 phase (specify 2 wire, 3 wire or 4 wire)

Select input

NOTE: If input is current or voltage, please specify AC or DC input.
If input is watts, vars power factor, etc., please specify CT ratio PT ratio and scale for calibration purposes

Select output

EX: 0-1MADC, 4-20MADC, 0-10VDC, 1-5 VDC, RS232 or RS485 communications, etc.

RS232 or RS485 output

Optical communications output

DC auxiliary power

Self powered

Special inputs, outputs, accuracys and calibration

Custom designs

Signal Conditioners, Transmitters and Isolators

Multiple outputs

Accuracys from .1% to .5%

Din rail, panel or rack mount units

Conforms to one or more of the following: UL, CSA, CE, ANSI or Specific IEEE specifications

DC current inputs: 1 millivolt to 10 DC amperes direct, 1-25000 DC amperes with ext. shunt

DC voltage inputs: 1 milliamp to 600DC volts direct

Pressure ranges: from 0-30000 PSI, 0-150,000 PSIG

Pulse ranges from 100 to 10,000 pulses/hour

Thermocouple ranges: B,C,J,K,N,R,S,T,S (specify temp range in degrees F or C)

RTD ranges: 10 OHM copper, 100 OHM platinum

Slide wire ranges (potentiometric): from 1K to 50K OHMS

Tap position ranges: from 10-50 taps at 30 OHMS, 5-50 TAPS at 400 OHMS

DC to DC transducers, transmitters

Loop powered isolators

Potentiometer isolators

Pressure transmitters (GP50)

Resistance transmitters (Crompton)

RTD signal conditioners

Slide wire transmitters (Crompton)

Strain gauge transmitters (Crompton)

Tap position transmitters (Crompton)

Thermocouple signal conditioners

Specify panel mount or din rail

Select input

NOTE;
If input is current or voltage, please specify AC or DC input.
Select output.
Select auxiliary power desired or self powered.

Alarm relays

LCD display

Custom calibration